Resorces as discussion on forum
I would like to see and discussion of Rescorces posted by Andy and only aviable to Andy, where all the good resorces are listed and links. All of us could use them but no one but Andy could add or...
View ArticleZoom request
I would like to add this to the wishlist.Most of the other programs I use, you can zoom in by pressing a letter on the keyboard and then select a part of the screen and it zooms in. Then by pressing...
View ArticleMTC wish
On my embroidery program there is a way to toggle between items on my design page by clicking the tab key.I would like to see this function added to the MTC program if possible. I am new to this...
View ArticleSticky for the Zing/MTC Manual
Would it be possible to have a sticky at the top of the forum with a link to the latest manual, since it is always being updated? A date of the last update as well as what sections were recently...
View ArticlePolygon thinning revisted
The new thinning is great, especially for scanned line drawings.I have a tangentially related need, but I don't know if it is common enough as to warrant a feature request...(I'm talking about using a...
View ArticlePencil drawing support
In order to use an automatic (aka self-propelling) pencil, you need to lift the pencil from the paper and put it down again in order to have it feed more lead through. This will require support from...
View Articleforum profile suggestion
How about a field in the profile where you can list which machine(s) you own or use?
View ArticleScan and Cut (SNC) versus PNC for the Zing
Myself, along with most of my friends and clients are avid stampers. And in many of those cases, they stamp something and then want to fussy cut it out. Given the precision of the Zing's laser...
View ArticleStraight lines
Andy is there a way you could add something so we will know for sure our lines are straight. Even a teeny bit off messes up some things. Again..thanks for all you do. Darlene
View Articlemake zoom with mouse wheel work like photoshop
Hello, I wanted to ask that Andy would make the mouse wheel zoom work like all the other programs do.Like Photoshop, Corel etc.The zoom should be focused (zomm into) where mouse pointer is - not always...
View Article.svg, .mtc, .ttf, .png, .jpeg files viewable all in one place....
Hi. I was just wondering if there is a way that we can view .mtc, .svg, .ttf .png, .jpeg files all in one place. I know in MTC that I can view .svg files or if I try to open, I can view .mtc files, but...
View ArticleAbility to add manual gridlines and "snap to grid"
Hi all! I am new to papercrafting and die cutting and am really anxious to start making cards and other craft projects. I have been using MTC for a couple of weeks and through much trial and error feel...
View ArticleRotating Texture Images
Just a quick wish, it would be great if in a future update we could munipulate a textured image. It's great what we can do so far but as I venture into print and cut it would be great to be able to...
View ArticlePlug In for GCC Expert 24
Ok I have been waiting and waiting for a plug in for my machine. Now I am at my wits end. My computer has crashed I used AI, which I had gotten from a job I no longer work at and now I cannot afford...
View ArticleNew Looks and german language/cm-support
Hello!I am quite new to MTC but I love it's possibilities! But there are two things I am really sad about and which are detering me from buying the software:1) It is really hard for me to learn a...
View ArticlePrint and Cut align to the corners of the paper
I want to use the print and cut to do 3 point alignment to the corners of the paper instead of to printed alignment points. The reason I want to do this is to ensure that the item is cut straight, even...
View ArticleNinja Turle
Does anyone have a mtc file for a ninja turtle?thank you in advance. Can you advice where is the best place to look for files? New to MTC so trying to learn the tricks. thanks again
View ArticleManual and software bundle
I don't know if this has been done yet, or even suggested, so I'll just put it out there.Wouldn't it be great if the MTC manual was part of the MTC download? So that when first time users downloaded...
View Article3 Point P & C for Gazelle
I love doing things in MTC...so much easier . Would love to be able to do the 3 Point P & C on the Gazelle with MTC. Thanks for all you do!
View Articletool path / tool entry / dwell times/ G Codes / Cartesian Coordinates MUHAHAHA
First off, this (amazing) software is the only reason I bought a Cricut, and I'm proud to say I haven't / never will buy a cartidge. How about tool path priorities / assignments? I'm attempting to cut...
View Articledecorative scissor and piercing tool
HI, I really enjoy your program! I was hoping you would come out with a scissors tool so I wouldn't have to spend soooo... much time looking for edges, breaking, copying pasting ,...scissors are...
View ArticleNew line type - Score Line
I would love to see an option for a new line type - Score Line. (as opposed to cut line). This would be similar to the feature in the Sizzix Eclips, where you can put your score lines on a separate...
View ArticleReverse the top of page (ie cut upside down) for eCraft cutter
I am new to the electronic cutting world. I just bought an eCraft and I LOVE it. I'm now playing with both the MTC and the eCraftShop Pro software.I am adding this discussion to the forum because the...
View ArticleA small wish for future update
Andy, If it would be possible, I can see having more color options in what we have to choose from could be helpful. I've done some coloring of shapes and have used them in some print and cuts...
View ArticleBacking Up Settings
I recently had to reinstall MTC after reinstalling my OS. Not knowing where all the settings for MTC and the plugins are stored to hack them back in, I had to set up the MTC settings again (which isn't...
View ArticleProfile Nesting Software (i.e. Automatic Image Layout Optimization)
Hi,Would it be at all possible to incorporate a profile nesting capability in MTC? Look at the following links for...
View ArticleNode editing enhancement
Andy,It would be great to have the added ability to work with groups of nodes -- here are a few things I would love to be able to do1. Change a group of nodes on a jagged pixel traced line to follow a...
View ArticleCustom cut profiles
I'm in the process of fine tuning the cut settings for my Silhouette Cameo and various weights of cardstock and vinyl. As I'm jotting down the optimal settings, I had the thought . . .I'd like to be...
View ArticleZing Preset Notes
Would it be possible to edit/add to Zing Preset Notes after an original note has been set up? The delete and re-enter function seems sort of dangerous where "important" notes could get lost.Thank you...
View ArticleDrag & Drop Layers and Pages
It would be great if we could drag and drop layers like in photoshop. Same thing for pages too. It's a bit of a pain moving them around one layer at a time.It would also be nice if when you add a...
View ArticleEdit History
I would love to have a 'Edit History' on menu, like in KNK Studio GE. And would really, really love to be able to zoom with mouse wheel. BTW, I am in love with my Zing and MTC! What a great machine for...
View ArticleNeed Guide Lines
It would be very helpful to have a feature in Make The Cut allowing us to add numerous guidelines while designing, with the ability to place them where needed, adjust their positions, and the option to...
View Articlepreviewing files
I just found out that you can preview the MTC files within the program. And that you can enlarge the picture also. It would be wonderful if there were a way to have a larger picture while scrolling...
View ArticleMinimum line thickness option
I would love to have an option to select minimum line thickness for fonts and designs. I have no idea if this is possible but it would be incredibly useful.For example, many beautiful script fonts have...
View ArticleA wish
This isn't a wish for anything in MTC, it's a wish for a new feature in the Vanilla forum software. I would like to see a PAGE button added so that when you see someone online you'd like to IM with you...
View Articlehoping Andy adds Cougar mat~Lawsuit
It would be so much easier for me if Andy adds a cougar mat to MTC, I thought I read somewhere that he was thinking of doing that, I hope so.
View Article"sticky" note with info about blade, mat, blade holder, etc interchangeability
I've seen several threads with great information on the above, but as I'm perusing them I don't pay a lot of attention if the items being discussed don't pertain to my cutter. Well, as luck would have...
View ArticlePrint Options and Mat sizes in MTC with regards to PNC
I hope this is a reasonable request - I have no idea how difficult it would be from a programming point of view.I would like the ability for registration marks, print setup etc and mat size to be saved...
View ArticleDXF import and export
since i use Autocad to draw engineering designs, it would be great if you guys add dxf import/export support. DXF is one of the most widely used formats for CAD drawing, this would allow me to design...
View ArticleCan you make MTC able to find and replace objects on the mat
I made a design with a bunch of different sized circles, and now I want to do the same design, but with stars. I found this for corel draw:http://www.oberonplace.com/draw/drawscripts/replacersh.htmA...
View ArticleMTC going to NBM in Dallas,Tx
I wish the MTC was going to the NBM show in Dallas,Tx May 10,11,12I wish the MTC was going to the ISS show in Ft.Worth,Tx in Sept 27,28,29th 2012I wish MTC was giving free classes at the shows. I wish...
View ArticleDimensioning of graphic
@AndyHere is a program for measuring with a digital camerahttp://www.stickyyard.com/eval/eval.phpMTC! can do the measuring once the photo is scaled to life-size. Could you add the ability to note the...
View ArticleIs there a way to save printer settings with the MTC file?
Edited to Add - I am changing the category to Wish List because this can't be done currently.I have been switching between printing on 4x6 photo paper and letter size for a few projects. When I open a...
View Articlea plug in for the silhouette cameo
just got the cameo(after sending back my second faulty eclips)...PLEASE
View ArticleGeneric HPGL/HPGL2 Plotter Driver Plugin
Hi Andy, with the profusion of cutting plotters out there and pretty much all of them operating on HPGL/HPGL2 how about a generic plotter driver plugin that would address all of them - PLEASE...
View ArticleOrganizing font list
I have waaaaaaaaay too many fonts (but I like it like that!), so it's time consuming for me to find the fonts I've installed in MTC. I'd like to have the option to "display MTC fonts first" so I could...
View ArticleWish for Metamorphosis, Guidelines, Greater tolerance for Fuse & Weld
In working with making spirals for tonight's webinar, I discovered some features that would be wonderful additions to Make The Cut. If you take a look at Sandy's brief video on making a spiral heart...
View Article